Surplus Equipment - Further information upon request 

ITEM 001-16 - FUEL GRADE HYDROUS ETHANOL DISTILLERY 240,000 L/D 96.0^GL

Location : Brazil - 80% Ready for shipment - 20% ready in 60 days

NEW - QUANTITY: 1, GUARANTEED PERFORMANCES, TECHNICAL ASSISTANCE PROVIDED. INCLUDES:

 

- 1 beer stripping column, Ø 2.700 mm in AISI 316, 20 trays  with bubblers type floating valves, carbon steel base, platforms and ladders;
- 1 beer epuration column, Ø 2.300mm in AISI 316,  4 trays with bubblers type caps with carbon steel platforms and stairs;
- 1 heads concentration column, Ø 900 mm in AISI 304, 6 trays with bubblers type floating valves;
- 1 phlegm rectification column, Ø 2.750 mm in AISI 304, 45 trays with bubblers type floating valvescarbon steel base, platforms and ladders;
- 1 phlegm exhaustion column, Ø 1.100mm in AISI 304,18 trays, with bubblers type floating valves, carbon steel base platforms and stairs;
- 1 falling film reboiler, 450 m² heating surface, in AISI 316 heads, tops, tubes and tubesheets, carbon steel base, platforms and stairs;
- 1 condenser, shell & tubes, 25 m², vertical, AISI 304 body, tubes & tubesheets, carbon steel heads and base;
- 1  condenser, shell & tubes, 25 m², vertical, AISI 304 body, tubes & tubesheets, carbon steel heads and base;

- 1 beer pre-heater, shell & tubes, 435 m², horizontal, AISI 316 heads, caps, tubes & tubesheets, AISI 304 body, carbon steel base;

- 1 condenser, shell & tubes, 215 m², horizontal, AISI 304 body, tubes & tubesheets, carbon steel heads, and saddle supports;

- 1 condenser, shell & tubes, 34 m², vertical, AISI 304  body, tubes & tubesheets, carbon steel heads, skirt base;
- 1 evaporator, thermosyphon type, 140 m², AISI 304 heads, tubesheets & tubeses and mirrors. Carbon steel body and skirt base;

- 1 reflux drum, horizontal, cylindrical Ø 1.000 mm x 1.300 mm long in AISI 304L plates,  carbon steel saddles supports;

- 1 condensate drum, vertical, cylindrical Ø 1.000 mm x 1.200 mm long, body and base skirt in carbon steel,

- 1 fusel oil decanter, vertical,  Ø 1200 mm x 1.800 mm high, in AISI 304 and carbon steel plates;

- 1 fusel oil cooler, tubular, Ø 255 mm x 3500 mm, in AISI 304 and carbon steel plates;

- 1 technical alcohol buffer tank, Ø 1,000 mm x 1.300mm high, in AISI 304, supports in carbon steel;

- 1 fusel oil tank, vertical, cylindrical, Ø 1,000 mm x 1,300 mm high , built in stainless steel plates AISI 304 and exit support in carbon steel.

- 1 steel structure on three stages, bolted, with dimensions for the support and operation of the equipment offered. Built with profiles and plates in carbon steel, efor equipment support, complete with operating platforms, stairs and guardrails;

- 1 set of piping and fitings  for interconnection of equipment within the perimeter of the unt, in AISI 304L or cabon steel as requested by the handled fluid;

- 1 set of safety valves 

- 1 set of manual valves 

 

Notes:

a) Build according to ASME codes, stamped, withstanding hurricane winds 

b) the above supply constitutes a complete and funcional distillery.

c) specifications /data sheets for missing componentes (pumps, electricals, controls are available to the buyer

d) engineering,technical assistance for installation and start-up, personnel training available to the buyer

ITEM 002-16 - MOLECULAR SIEVE FOR FUEL GRADE ETHANOL - 230,000 L/D 99.8^GL

Location : Brazil - 70% Ready for shipment - 30% ready in 60 days

NEW - QUANTITY: 1, GUARANTEED PERFORMANCES, TECHNICAL ASSISTANCE PROVIDED. INCLUDES:

 

- 1 falling film evaporator, 75 m²,  vertical, AISI 304 body, heads, tubes & tubesheets, carbon steel base;
- 1 vapor separator vessel, Ø 1.800mm  x 3,000 mm,  AISI 304 body,  carbon steel base skirt.
- 1 hydrated ethanol superheater, shell & tube, vertical, 42 m², AISI 304 heads, tubes & tubesheets, carbon steel body and base skirt. 
- 2 adsorption reactors with dissecant support, (Zeolite not included) , ASTM A-516- Gr. 70 carbon steel body, base, platforms and stairs;
- 1 condenser, shell & tubes, 200 m², horizontal, AISI 304 body, tubes & tubesheets, carbon steel heads and saddle supports;
- 1  reflux guard condenser, shell & tubes, 25 m², vertical, AISI 304 body, tubes & tubesheets, carbon steel heads and base skirt;

- 1 phlegm buffer drum, vertical, cylindrical Ø 1.000 mm x 1.500 mm long in AISI 304L plates,  carbon steel base skirt;

- 1 dehydrated alcohol main condenser, shell & tubes, 80 m², horizontal, AISI 304 body, tubes & tubesheets, carbon steel heads and saddle supports;

- 1 dehydrated alcohol guard condenser, shell & tubes, 25 m², vertical, AISI 304 body, tubes & tubesheets, carbon steel heads and base skirt;

- 1 dehydrated ethanol buffer drum, vertical, cylindrical Ø 1.000 mm x 1.500 mm high in AISI 304 plates,  carbon steel base skirt ;

- 1 dehydrated ethanol blowdown drum, vertical, cylindrical Ø 700 mm x 1.050 mm high in AISI 304 plates,  carbon steel base skirt;

- 1 condensate receiving drum, vertical, cylindrical Ø 800 mm x 1.000 mm high, carbon steel body and base skirt;

- 1 steel structure on three stages, bolted, with dimensions for the support and operation of the equipment offered. Built with profiles and plates in carbon steel, efor equipment support, complete with operating platforms, stairs and guardrails;

- 1 set of piping and fitings  for interconnection of equipment within the perimeter of the unt, in AISI 304L or cabon steel as required by the handled fluid;

- 1 set of safety valves 

- 1 set of manual valves 

 

Notes:

a) Build according to ASME codes, stamped, withstanding hurricane winds 

b) the above supply constitutes a complete and funcional distillery.

c) specifications /data sheets for missing componentes (pumps, electricals, controls are available to the buyer

d) engineering,technical assistance for installation and start-up, personnel training available to the buyer

ITEM 003-16 - TGM TURBO GEAR, TMC 15000, 14,500 KW

Location : Brazil - 90% Ready for shipment - 10% ready in 30 days

NEW - QUANTITY: 1, UNDER WARRANTY, TECHNICAL ASSISTANCE PROVIDED. INCLUDES:

 

- 1 TGM TMC 15,000, extraction/condensing Steam Turbine

   live steam conditions (P/T/Flow) 42 Bar (a), 450^C, 68,800 kg/h

   1st extraction steam conditions  (P/Flow) 15.5 Bar (a), 2,800 kg/h

   2nd extraction steam conditions  (P/Flow) 5.77 Bar (a), 8,000 kg/h

   exhaust steam conditions  (P/Flow) 0.2 Bar (a), 58,000 kg/h

   turbine speed 6,000 rpm

 

- 1 TGM hgh speed gearbox

   bi-helicoidal,  parallel shaft

   cast steel casing

   forged steel gears, cemented and rectified teeth

   Input/output speed 6,000/1,500 rpm

   white metal bearing linings

   Power at input shaft : 15,110 kW

   Service factor 1.3

   Efficiency 98.3%

   Ortogonal mounted turning gear with 15 kW motor

  

- 1 high speed flexible type coupling, 6,000 rpm, service factor 1.5

- 1 low speed, gear type coupling, 1,500 rpm, service factor 1.5, grease lubricated

- 1 complete lube oil system including main shaft drive pump, auxiliary electrical pump, emergency       electrical pump, oil cooler, oil filter and oil tank

 

- 1 electronic governor, Woodward 505 with CPC

- 1 base plate common to turbine and gear

- 1 turbine local panel with HMI

- 1 PLC programmable

- 1 steam seal system

- 1 set of pressure and temperature transmitters

- 1 vobration and axial displacement monitoring system

- 1 electronic overspeed protection system Protech 203 

- 1 set of levelling plates and anchor bolts

- 1steam drain valve

- 1thermal insulation for the turbine

-1 set of spare parts

-1 ocean packing

 

Notes:

a) turbine and gear can be sold separately

c) specifications installation drawings available to the buyer

d) engineering,technical assistance for installation and start-up, personnel training available to the buyer

ITEM 004-16 - GEA COOLING TOWER

Location : Clewiston, Florida USA – In parts on pallets, as shipped by the manufacturer. Presently stored in a warehouse

NEW - QUANTITY: 1

 

Description

  • Construction Type : Modular 

  • Fill Type : T Splash Bar 

  • Number of cells : 3

  • Cooling tower model : D-2

  • Total flow rate : 3.600 / (15,847), m³/h / (GPM)

  • Flow rate per cell : 1.200 / (5,282), m³/h / (GPM)

  • Hot water temp. :  42,0 / (107.6), oC / (oF)

  • Cold water temp. : 32,0 / (89.6), oC / (oF)

  • Wet Bulb temp. : 26,0 / (78.8), oC / (oF)

  • Fill volume : 250 / (8,828), m3/cell / (ft3/cell)

  • Power (installed per cell) : 125 HP

General Characteristics:

 

  • Modular in GRP and auxiliary concrete  

  • Diffuser in GRP self-extinguishable according UL 94 class V2;

  • Cylinder, Casing in GRP self-extinguishable according UL 94 class V2;

  • Cold water basin in concrete (excluded)

  • Auxiliary Internal structure in Carbon Steel hot dip galvanized supported on concrete (excluded);

  • Hot Water distribution system with headers and secondary pipes in PVC

  • Nozzles in Polypropylene or ABS 

  • Water distribution system supports in Hot dip galvanized steel

  • Drift eliminator support in Hot Dip Galvanized Steel

  • Filling in Triangular Splash Bar in PVC;

  • Drift eliminator in PVC (or in GRP self-extinguishable according UL 94 class V0;

  • Driver with Coaxial Gear Reducer (without drive shaft);

  • Support for motor and speed reducer in Hot Dip Galvanized Steel

  • Electrical motor in Cast Iron

  • Gear speed reducer in Cast Iron

  • Fan Blades in GRP SE or Aluminum

  • Fan cube in Cast iron / Carbon steel

  • Washers / nut in Stainless Steel SS304

Includes:


Services:


- Thermal design
- Mechanical design
- Hydraulic design (water distribution system)
- Drawings with loads of the cooling tower
- Data sheet of the equipment
- Assembly drawings
- Installation / maintenance manual
- UL 94 Test Report of parts manufactured in GRP and PP 

 

Components


- Structure in GRP (partial) and Concrete by client
- Cylinder
- Diffuser / Panels
- Water distribution system support
- Drift eliminator
- Drift eliminator support
- Fill
- Fill support
- Electrical motor
- Gear reducer
- Axial fan
- Driver support

- Ladders, according to OSHA

- Vibration detection switch 

- Washer, nuts and bolts
- Identification tags


 

ITEM 005-16 - GEA COOLING TOWER

Location : Clewiston, Florida USA – In parts, on pallets, as shipped by the manufacturer. Presently stored in a warehouse

NEW - QUANTITY: 1

Description

  • Construction Type : Modular 

  • Fill Type : T Splash Bar

  • Number of cells : 3

  • Cooling tower model : E-4

  • Total flow rate : 3.300 / (14,526), m³/h / (GPM)

  • Flow rate per cell : 1.100 / (4,842), m³/h / (GPM)

  • Hot water temp. :  45,0 / (113), oC / (oF)

  • Cold water temp. : 29,0 / (84.2, oC / (oF)

  • Wet Bulb temp. : 26,0 / (78.8), oC / (oF)

  • Fill volume : 480 / (16,951), m3/cell / (ft3/cell)

  • Power (installed per cell) : 175 HP

General Characteristics:

 

  • Modular in GRP and auxiliary concrete  

  • Diffuser in GRP self-extinguishable according UL 94 class V2;

  • Cylinder, Casing in GRP self-extinguishable according UL 94 class V2;

  • Cold water basin in concrete (excluded)

  • Auxiliary Internal structure in Carbon Steel hot dip galvanized supported on concrete (excluded);

  • Hot Water distribution system with headers and secondary pipes in PVC

  • Nozzles in Polypropylene or ABS 

  • Water distribution system supports in Hot dip galvanized steel

  • Drift eliminator support in Hot Dip Galvanized Steel

  • Filling in Triangular Splash Bar in PVC;

  • Drift eliminator in PVC (or in GRP self-extinguishable according UL 94 class V0;

  • Driver with Coaxial Gear Reducer (without drive shaft);

  • Support for motor and speed reducer in Hot Dip Galvanized Steel

  • Electrical motor in Cast Iron

  • Gear speed reducer in Cast Iron

  • Fan Blades in GRP SE or Aluminum

  • Fan cube in Cast iron / Carbon steel

  • Washers / nut in Stainless Steel SS304

Includes:


Services:


- Thermal design
- Mechanical design
- Hydraulic design (water distribution system)
- Drawings with loads of the cooling tower
- Data sheet of the equipment
- Assembly drawings
- Installation / maintenance manual
- UL 94 Test Report of parts manufactured in GRP and PP 

 

Components


- Structure in GRP (partial) and Concrete by client
- Cylinder
- Diffuser / Panels
- Water distribution system support
- Drift eliminator
- Drift eliminator support
- Fill
- Fill support
- Electrical motor
- Gear reducer
- Axial fan
- Driver support

- Ladders, according to OSHA

- Vibration detection switch 

- Washer, nuts and bolts
- Identification tags


 

ITEM 006-16 - DOSITEC BATCH TYPE CHEMICAL DOSING SYSTEM FOR STEAM BOILER

Location : Brazil - Ready for shipment

NEW - QUANTITY: 1, INCLUDES:

 

- 02 tanks in polypropylene,  1,000 L capacity, built with hinged lid and pedestals
- 01 Electrical panel power and control , 480 V powr circuit, and 220 V control circuit;
- 02 levelgauges,  glass tube type;
- 01 set of stainless steel piping for the delivery section;
- 01 set of valves and interconnections between the pump and the PVC tank;
- 02 manometers 0-200 kg/cm2, Ø 2.1 / 2 " display, connection Ø 1/4" NPT, with glycerine, entirely in stainless steel;
- 03 Dositec relief valves in stainless steel set with set point 10% above the working pressure;
- 01 Single Skid in carbon steel to support the whole assembly;
- 03 Flow sensors for monitoring the operation;
- 02 Capacitive type level probes;
- 02 multiport valves in stainless steel with connections for manometer  and purging;
- 03 Filters-y in PVC fpr the suction line;
- 03 Piston type Dositec metering pumps for  high pressure, DDP-3 / 375-185-304 model. Parts in contact with fluid in AISI-304. Complete with 1.5 HP motor, 1750 RPM, 480 V., flow up to 60 l/h at 130 kgf / cm2;
- 02 graduated Beakers 250 ml, for pump measuring ;
- 02 stirrers with stainless steel shaft, 0.33 HP, 480 V motor

1 / 1

Please reload

1/1

© 2017 by Uni-systems, Inc.

  • YouTube Social  Icon
  • Google+ - Black Circle

Uni-systems, Inc.

240 Crandon Blvd., Suite 286,

Key Biscayne, Fl, 33149

Tel  +1 (305) 361.1230

Fax +1 (305) 365.6451

Email webmaster@uni-systems.us

 

Follow us on